-
Good Plastivity Pre-Baked Carbon Anode Block for High Performance Supplier
Anode carbon materials include carbon anode block, anode paste. The anode carbon materials are widely used in electrolytic aluminum industry. Pre-baked anode carbon blocks are the main auxiliary material for producing aluminum ingot from alumina.
Welcome to inquire
Whatsapp&Mob:+86-13722682542
Email:merry@ykcpc.com
Web:www.ykcpc.com;www.qfcarbon.com
-
GE|Graphite Electrodes Low Consumption Strong Electrical Conductivity Wholesale Buyers|RP|HP|UHP
Graphite has high thermal conductivity and is very resistant to heat and impact. It also has low electrical resistance, which means it can conduct the large electrical currents needed to melt iron. In recent years, graphite electrodes have been made even more efficient: they can now conduct even higher currents and more power. Using the expertise collected over a century of innovation, Tokai Carbon has developed the world's biggest electrodes. They measure 32 inches (about 80 cm) in diameter and are 3 meters long.
Welcome to inquire
Whatsapp&Mob:+86-13722682542
Email:merry@ykcpc.com
Web:www.ykcpc.com;www.qfcarbon.com
-
China Manufacturer Supply Carbon Raiser Graphitized petroleum coke GPC
Graphite Petroleum Coke is made from high quality petroleum coke under a temperature of 2800ºC. And it is widely used as the best kind of recarburizer for producing high quality steel, special steel or other related metallurgical industries, because of its high fixed carbon content, low sulfur content and high absorb rate. Besides, it also can be used in plastic and rubber production as an additive.Special particle size can be customized according to your requirement.
Welcome to inquire
Whatsapp&Mob:
+86-13722682542
Email:merry@ykcpc.com
Web:www.ykcpc.com;www.qfcarbon.com -
CPC|Hot Sale Calcined Petroleum Coke In Factory Price1-5mm/0-50mm
CPC is suitable for use in an induction furnace melting, using a slightly different method according to the specific process requirements of each unit. (1) Intermediate frequency electric furnace smelting,can add into the furnace in the lower part according to the ratio of carbon equivalent requirements or material with the recovery rate up to 95%. (2)After melting is completed,if the carbon content isn't enough that needs to adjust, first remove furnace slag,then add carbon agent, through heating up of molten iron by electromagnetic stirring or artificial stirring to dissolve the carbon to be absorbed with the recovery up to 90%. If apply low temperature carbon growth process, that only part of charge is melted with lower melting temperature of molten iron,then add all recarburizer in liquid iron, also with a solid charge pressed it into liquid iron do not let it exposed on the surface.In this method it can reach more than 1.0% carbon of iron liquid.
Welcome to inquire
Whatsapp&Mob:+86-13722682542
Email:merry@ykcpc.com
Web:www.ykcpc.com;www.qfcarbon.com -
Customized High Carbon Calcined Anthracite Coal
High Carbon Calcined Anthracite Coal can be called carbon additive, carbon raiser, recarburizer, injection coke, charging coke, and gas calcined anthracite. Best quality Anthracite as raw materials through high temperature calcined at over 2000℃ by the DC electric calciner with results in eliminating the moisture and volatile matter from Anthracite efficiently, improving the density and the electric conductivity and strengthening the mechanical strength and anti-oxidation. High Carbon Calcined Anthracite Coal has good characteristics with low ash, low resistivity, low sulphur, high carbon and high density. High Carbon Calcined Anthracite Coal is the best material for high quality carbon products. It is used as carbon additive in steel industry or fuel.
Welcome to inquire
Whatsapp&Mob:+86-13722682542
Email:merry@ykcpc.com
Web:www.ykcpc.com;www.qfcarbon.com
-
graphite electrode broken piecs is subsidiary products of electrode machining process
Graphite electrode scrap
Specs: Resistivity: 5.5-7.5
Size: Minimum diameter 20cm, minimum length 20cm, can be made according to requirements
Packing: One ton in large bags or bulk packing -
ultra high power Graphite Electrode
Specs: Diameter: 300-600mm Resistivity :electrode 4.8-5.8, nipple 3.8-4.5 Flexural strength :electrode 10.0-14.0 nipple 20.0-26.0 Young’s modulus :electrode 9.0-13.0 Nipple 15.0-18.0 Bulk density: electrode 1.68-1.74 nipple 1.77-1.82 CTE: electrode 1.1-1.4 Nipple 0.9-1.2 Contact information : E-mail :aurora@ykcpc.com Whatsapp&Mob: + 86 – 13730054216 -
Graphitized petroleum coke
Purpose: Graphite petroleum coke GPC is made of high quality petroleum coke. It is a kind of high quality carburizing agent, with high fixed carbon, low sulfur, low ash, high absorption rate and other advantages. Can be used to produce high quality steel, cast iron and alloy. Graphitized petroleum coke is made from high quality petroleum coke at temperatures of 2500-3000°C. As a high quality carburizing agent, it has high fixed carbon content and low sulfur. Low ash content, high absorption r... -
ultra high power Graphite Electrode (UHP)
Graphite electrode mainly uses petroleum coke and needle coke as raw materials, coal pitch as binder, after calcination, batching, kneading, molding, roasting and graphitization, machining, it in the arc furnace in the form of arc conduction to release electricity. Our company provides UHP of different diameters,For more product details, please contact: Email: aurora@ykcpc.com
Whatsapp&Mob: +86-13730054216
Web:www.ykcpc.com -
1-5mm C 98.5% Good Quality Graphite Petroleum Coke GPC Pet Coke
Hello everyone
This is one of the main products of our company.
The following is its basic specification for reference only.
Size: 1-5mm or any other size.
Sulphur: 0.05% max
Ash: 0.5%
Fixed carbon: 97%-98% min
Moisture: 0.5%
V.M.: 1.0%
Color: black and gray
Supply ability: 2000tons per month
Packing details: jumbo bags or according to customer requirements.
Port: Tianjin port
Atten: aurora@ykcpc.com
Mob/whatsapp: 86-13730054216 -
98.5% C, 0.5% S, Calcined Petroleum Coke CPC ON SALE
Calcined Petroleum Coke(CPC)
Specs:FC: 98.5 % min S: 0.5% max Ash: 0.5 % max VM: 0.6 % max Moisture: 0.5 % max
Size: 0.5-3mm;1-5mm,3-8mm,8-30mm, 0-30mm
Packing: Jumbo Bags
According to clients' requirement,we could supply different specification and size.
We're looking for sales agent or business partner of our
product,if you’re interested in, please contact me for pricing and availability.
Atten: Aurora
Emial: aurora@ykcpc.com
Cell/wechat/whatsapp: + 86-13730054216
Alibaba: https://www.alibaba.com/product-detail/calcined-petroleum-coke-CPC-for-producing_1600133484575.html?spm=a2747.manage.0.0.1b2a71d21e0NRf
Interested parties are welcome to have business negotiation with us. -
Semi Graphite Petroleum Coke, as Recarburzier in iron and steel foundry
Semi-GPC:
F.C: 98%min, Sulfur 0.5%max, Ash: 0.7%max, Size:1-5mm&1-3mm
Packing: 25kgs small bags into ton bags, one ton jumbo bags, or according to customers request
weolcome to inquire: Email: aurora @ykcpc.com
Mob&whatsapp: +86-13730054216
Web: www.ykcpc.com, www.qfindustrial.com