Good Plastivity Pre-Baked Carbon Anode Block for High Performance Supplier
Sampling and testing are carried out simultaneously with shipment
Anode carbon block sampling steps
Core Drill Bit: Diamond or other superhard material coating, the drill bit diameter depends on the subsequent test standard requirements, typically 50 mm recommended
Power equipment: Electric or pneumatic drill that can drive the core drill bit to rotate stably, and must be able to keep the drill bit vertical or horizontal
Compressed air device: used to cool the drill bit and remove drill cuttings during drilling, water or other liquids must not be used as coolants
Wedge or crowbar: used to remove the core sample
Measuring tools: steel ruler, vernier caliper, etc., used to confirm whether the sample size meets the test requirements
Contact Person: Mike Zhao
E: Mike@ykcpc.com
CeL: +86 19933504565
